FIX FOR NOISY LIFTERS. 

Add. Drive to end tapping - guaranteed! 

The fix for noisy lifters>>> Contact Info: If on a smartphone, to ask a question, order items listed below, call me george at 512 665 3388 

Two Reviews, ordering fix for noisy lifters, and techie info bottom of page.

  1. "CORRECTIVE ACTION" Quote  from: 

        auto-repair-help.com/auto_diagnostics/engine_tapping.php

Replacement of the valve lifters usually requires major disassembly of the engine. There are oil additives available that can free sticking lifters. This type of additive should be added as per the products recommendation. Frequent oil changes with additional treatments may be necessary in severe cases. If these products are an unsuccessful remedy, lifter replacement may be the only alternative. You should consider having the diagnosis verified prior to undertaking any major engine repair." by Mark Davidson. End.

The fix for noisy lifters.

  • One way to correct your engine  lifter tap problem is a $3000+ motor disassembly. Needed to reach and replace the lifters.  One may be bad but all are replaced - just in case. That,  and other half-worn parts may be replaced while in the motor.  That is costly for a remedy.
  • Mega Power solves this complex and costly fix for noisy lifters  holistically for $399 for diesel trucks and large motors. And $250 if a mechanic installs it in a car or pickup. Around $100 if you install it. its easy to do , explained below.
  • Thousands of man or women car owners  have use Mega Power as their fix for noisy lifters. You need the same help and  products.

For cars and pickups, order here. Large trucks, order below.

Order Mega Power Slo-wear Engine Valve Lifter Treatment Fix.  Slo-wear comes with 6 items needed, easy-to follow directions, phone help if needed, money back guarantee if not satisfied. Shipped to your door in about 3 days.    Just $80+$15s&h=$95 total. Order now!

Holistic means Mega Power Ends Valve Lifter Tap and its Cause

  •  Mega Power is a treatment using 6 items in 2 steps. It is easy to install. However a complex action becomes the quieting fix for noisy lifters. This is done by adding Mega Power to the motor as shown and then driving.  
  • Driving let the Mega Power Cleaning and freeing chemistry work out an end lifter tapping. This is done in this way
  • Mega Power stops lifter tapping by opening blocked oil flow to the lifter, and its freeing of its stuck condition, is done by other chemistry in the treatment.  Holistic, it also...
  • Ends blow-by,  the most likely cause of lifter  sticking and tapping. 
  • Mega Power also removes sludge to stop other engine problems.

How do  lifters start tapping?  

Valve lifters; about 8 to 24 in most engines help open and close valves for fueling and letting fuel and exhaust in and out.  Because of valve wear these thumb-size adjusters take-up wear slack. 

Your engine's oil pressure forces the adjuster to close wear spaces. Sludge collecting in motor oil block oil to  the adjuster part and it drops back in its bore creating a space. With each engine rotation the gap smacks the valve - you hear it as tapping. That's noise is no good for your engine, of course.

Now, you know! Order Mega Power to end your  lifter and valve tap before real damage occurs.


  • Trouble is always present as other wear negatives for long, quiet engine life remain and speed up. Replacing lifters do not end those negatives.  Our Mega Power ends the tap and those other problems, too!  Read about those Mega Power features on other pages.

The best fix for noisy lifters - summary.

Sumarry.

  • Mega Power has many great features, advantages, and benefits. 
  • It is  the fix for noisy lifters and valves and  will make your engine -  run quiet, stronger, zippier, and with 20 to 40  miles further on each  tank of fuel -People love it for their new vehicle problem-avoiding protection!  Just add, drive - and the noise just goes away.  Permanently.

Ordering infor:  For Large Trucks Tractors and such. With 3 to 10 gallon motor oil capacity.  Comes 5 gallons needed: 2 fuel side gallons, + 1 gallon lifter free-er,  2 engine and valve and lifter revitalizers and conditioners. 1  combustion cleaner, Total 6 items as the treatment. Includes easy-to follow directions, phone help, guarantee,  Fedex delivery in 3 days.  $399 plus shipping and tax, total  $450 

Order for 2 large vehicle lifter treatments for 2 motors  or several cars engines. Summer Special.   Includes 10  gallons  + 2  combustion cleaners, Total 12 items as the treatment. Includes easy-to follow directions, phone help, guarantee,  Fedex delivery in 3 days. Click cart to see our Spring special sale savings. Just  $560 for 2 big engine quieting protection.

Ordering infor:  For cars, pickups, boats, motorcycles. Comes in  6 item treatment  shown,  Includes easy-to follow directions, phone help, guarantee,  Fedex delivery in 3 days.  Just $4$85 plus $14 s-h= $99 total. Extra $50 ship charge to Canada and other countries. 

Why do they make a tap noise.

  • A noise problem develops when the adjuster losses it hydraulic action for some reason. Usually, from oil blockage from a sludge caused problem. When this happens the adjusters falls creating a space and the harmful noise.

There are 2 ways for a quiet fix for noisy lifters:

  1. By repair, where the motor is disassembled, cleaned,  machining of valves, and new lifters replace existing lifters. Takes a week or two. Cost can run over $2500 to $5000. 
  2. New products, shown from Mega Power and  Slo-wear Fix-better Longer - special engine transmission additives treatments end tapping - guaranteed. Do so  by specialized cleaning  and freeing of lifter adjusted - which ends tapping. Works for valve caused tapping and rough idle conditions.
  3.  Under $250 if a mechanic installs the product. Under $100 if you can do so your self. We show that it is easy to end the problem in this manner.   

Directions for the use of this additive fix for noisy lifters.           

1- This fix for noisy lifters works in a 2 step fashion, because that's  what turns out to be the fix to clean and free noisy lifters. The first step cleans the lifters and top of the motor and its valves. 

2- The 2nd step uses 3 additional items to finish cleaning and lube aid called conditioners to actually free the lifter adjuster from the bottom oil side. This 2 fold process ends the tap noise problem.

Things to remember.

  • Lifter slack needs to end to keep your motor quiet and dependable 
  • There are 8 to 24 lifters - one for each of your 8 to 24 engine valves.
  • The adjustment is done by oil under pressure pushing the adjuster outward to close up wear gaps as it occurs.
  • Dirty conditions that even synthetic oil could not remove lets the problem grow.
  • There are 2 ways to end the problems. Ours is faster. cheaper, and works as you drive. Avoids a costlier fix if a part actually breaks from the problem. 
  • If this pleases you, look over this drawing of how it works and then order 1 or more engine valve lifter treatments for all your cars, below.
  • When residues and sludge blocked oil to the adjuster it collapses creating a space that bangs with a tap tap tap on each engine rotation.
  • Tap spaces are shown where 2 way arrows and X's are placed.
  • What a mechanic does: He will take your engine apart, have the valves cleaned and machined at a machine shop [$1500] while he replaces the 8 to 24 valve lifters [$1500]- an any half worn parts found [$500 to $2000]. Cost can run $2500 to $4000. Takes 10 days.
  • Chemistry now comes to the aid of the car owner and takes a day of driving with a special engine treatment called Slo-wear. 
  • Slo-wear is installed in the  gas and motor oil -  driving does the fix by cleaning and freeing. This action gets oil to flow to the valve lifters - and this returns quiet strong operation to your motor.
  •  - for about $250 is a mechanic  does the install. Under $100 if you do so. Directions and the install are easy to do. Professional results guaranteed. Nothing to take a part.
  • With my method, any non-mechanically inclined person will end their tap problem themselves - with professional results!

You now know more about the fix than 99 out of 100 mechanics.  Most are just bad part changers.

Order Now! Sold only online and shipped to your door in about 3 days by FedEx. Phone help offered at no charge.

The fix for noisy lifters - and my tips below.

Directions for the Slo-wear Engine Valve Treatment.

There are 2 steps. Step One: Add the 3 items  shown to the gas and oil and driven the car as usual for a week. Step 2 uses the other 3 items during an oil change a week later. That returns the  quiet function your car use to have. Cost is under $100. Not $3000.  Order Slo-wear now! Get on down the road of life again worry,  and noise free!


Our Guarantee: If Slo-wear fails and a repair is done, send us a copy of repair receipt for a full refund. Order Slo-wear now! The success rate is 99 out of 100. go here.Thousands of happy customers. Diesel truck and equipment fix for noisy lifters, go here. 

The fix for noisy lifters: How the tap starts.

Inside the adjuster part of the lifter is a piston the size of a pencil-eraser. Your motor's oil pump sends oil under pressure to the lifter, passes a door to get to the adjuster part, and oil pressure forces the adjuster outward so it always stays in contact with the valve it works with. A tiny door - itself a valve, closes to trap and hold oil firm against the adjuster. All is well as long as those parts stay clean.

The lifter tap trouble starts in your engine...  in this way.

From combustion pressures extremely hot combustion gasses escape pass your motor's piston rings and valves as they become residue coated and lazily operate. Those gasses mixes into your motor oil forming sludge. Some sludge is drained out, some travels about - and when sludge holds the adjuster door open - the adjuster collapses -causing the tap this way.

A space develops and the lifter closes that space, a hammer-like smack occurs as it hits the valve on each revolution. That is the causes of your noise. The Product shown I call The Slo-wear Valve lifter Treatment is the only known remedy to clean that area of the motor to get oil flowing again to quiet the tap! Its what your motor and every good motor needs to end or avoid this problem!

Lets also cover what else sludge is doing inside your engine to cut its life in two - and our remedy to get it quiet and running great indefinitely.

Sludge contains acids. Acids pit the shinny smooth, clean piston bearings valves and gears you paid so much for when new.  That pitting increases your engine and transmission's friction and their faster wear out speeds.  Transmission troubles start when its gear shift valves stick causing rough shifting. A Slo-wear treatment keeps troubles there away!

What else you should know to end this problem for good - inexpensively!

The Techy part of the story and ordering info below.

Anyhow... Sludge collects in the darnedest places - inside the lifter and holds its check-valve open - or blocks oil to the lifter.

In either case, the little piston drops and a space is created. Each time the engine spins around the valve lifter closes the space against the valve with a hammer -like smack - you hear as a sound like your engine might be hammering apart - it is!

Transmissions have a similar valve problem when dirty, and repair shops charge over 3 grand to take the transmission apart and clean the valve body to end rough shift problems. Slo-wear prevents and ends shift problems, also!

The 3 remedies and fix for noisy lifters.

  1. The mechanic's way! Tear into your engine and replace the lifters at a cost of about $3,000 to double that amount.
  2. MY way!  Install the Slo-wear Engine Additive Treatment. It ends over 21 wear and performance problems including quieting noisy lifters! Just under $250 for Slow-wear, if a mechanic does the install. Under $100 if you do so yourself.  It's easy to install Slo-wear with my help. Order this engine treatment here...
  3. Try a part store, or quick lube additive. However, before you do read the Harmful fix for noisy lifters they offer. 
Slo-wear Engine Valve Tap Ending TreatmentSlo-wear Engine Valve Tap Ending Treatment

Order Mega Power Slo-wear Engine Valve Lifter Treatment Fix.  Slo-wear comes with 6 items needed, easy-to follow directions, phone help if needed, money back guarantee if not satisfied. Shipped to your door in about 3 days.    Just $80+$15s&h=$95 total. Order now!

Order Slo-wear Engine Treatment to protect both cars! Includes 12 items needed, easy-to follow directions, phone help if needed, guarantee. Shipped to your door in about 3 days.   Just $150 total. Includes shipping. Save $40  during our special. Order your fix for noisy lifter now!

Order Slo-wear to protect your engine and transmission. Includes 9 items needed, easy-to follow directions, phone help if needed, guarantee. Shipped to your door in about 3 days.   Just $135 total. Includes shipping. Save $35  during our special. Order now!

It's now very possible with new additives to skip one of those $2500 costly engine repairs as a fix for your noisy lifters.  Such unexpected expense as a $2500 repair can ruin most household budgets. So, if this new fix from Slo-wear, using special cleaning and freeing ingredients I found, works in your car, like it has for hundreds of others - you got yourself a great running engine again, and budget saving deal!.

Please note: Only 2 refunds last 267 days!

My Review:

How tap ending products work as a fix for noisy lifters.

To understand how, lets cover some basics, OK? 

Lifters are thumb-size devices in every motor that help open and close the motors valves. They  use your motor's oil and its oil pressure to move an adjuster outward - as space and wear occurs in the engines valve train of parts - the faster wearing of parts. The adjustment part  moves outward so no space appears. This keeps your motor running smooth, powerful, wearing less, and quiet. We'll get back to lifter problems and the fix in a moment. Right now, I want you to know...

However, motors are dirty functioning devices. That is your problem! The dirty part comes from combustion - that makes the horsepower for its operation. As combustion forces push against your pistons, some of it escapes and mixes with your motor oil below. This escape of combustion is called blowby by us mechanics.

Blowby is about 600 degrees hot! Though in small amounts, blowby starts sludge formation as its heat an acidic content mixes and curdles your oil. In time, some sludge escapes your filtering process an ends up at the end of the various oil passage ways.

The fix for noisy lifters

It's quite possible with new additives to skip one of those $2500 costly engine repairs to fix your noisy engine.  Such unexpected expense can ruin most household budgets.

So, if this new fix from Slo-wear, using special lifter cleaning and freeing ingredients I found, works in your car, like it has for hundreds of others - including in  both my 2000 Ford Windstar, and96 Honda Shadow, you got yourself a great engine and budget saving deal! And a great running car for years to come! 

The fix for noisy lifters. How they work.

Lifters are thumb-size devices in every motor that help open and close the motors valves. They  use your motor's oil and its oil pressure to move an adjuster outward - as space and wear occurs in the engines valve train of parts - the faster wearing of parts. The adjustment part  moves outward so no space appears. This keeps your motor running smooth, powerful, wearing less, and quiet. We'll get back to lifter problems and the fix in a moment. Right now, I want you to know...

However, motors are dirty functioning devices. That is your problem! The dirty part comes from combustion - that makes the horsepower for its operation. As combustion forces push against your pistons, some of it escapes and mixes with your motor oil below. This escape of combustion is called blowby by us mechanics.

Blowby is about 600 degrees hot! Though in small amounts, blowby starts sludge formation as its heat an acidic content mixes and curdles your oil. In time, some sludge escapes your filtering process an ends up at the end of the various oil passage ways.

The fix for noisy lifters

Slo-wear Engine  is an Additive Treatment  ends over 21 wear and performance problemsSlo-wear Engine is an Additive Treatment ends over 21 wear and performance problems

Cause of lifter tapping.
That blockage happens to be where pressurized oil delivery to the lifters keeps it pushing outward. Blockage of oil acts like a nail hole in your tire and cause it to collapse. Loss of oil pressure causes loss of pressure against the lifter adjuster and it drops. The collapse makes a space that - with each engine rotation smacks the valve as it closes the gap - causing your tap and noisy motor. Of course, the noise makes  you think the motor is warn out - when its not!

The usual remedy is a $3000 engine overhaul where all those parts are replaced with new. However, Slo-wear Engine Treatment has ingrdent that fix the noisy lifters by cleaning.

Slo-wear uses 6 cleaners and conditioners. Its cleaning remedy has proven to go where oil can't go. There, Hi-tech cleaners dissolve the sludge and residue  - something you would think synthetic oil should do - but can't seem too.

A few mechanics use Slo-wear as a maintenance method in with tune ups and engine repairs as a way to guaranteed great results. So should you! Slo-wear depends on Friction Modifiers like this demo shows.  Slo-wear works!

Order Slo-wear Engine Treatment fix for noisy lifters. Slo-wear comes with 6 items needed, easy-to follow directions, phone help if needed, guarantee. Shipped to your door in about 3 days.    Just $80+$15s&h=$95 total. Order now!

Order Slo-wear Engine Treatment to protect both cars! Includes 12 items needed, easy-to follow directions, phone help if needed, guarantee. Shipped to your door in about 3 days.   Just $150 total. Includes shipping. Save $40  during our special. Order now!

Order Slo-wear to protect your engine and transmission. Includes 9 items needed, easy-to follow directions, phone help if needed, guarantee. Shipped to your door in about 3 days.   Just $135 total. Includes shipping. Save $35  during our special. Order now!

Fix for noisy lifters Contact Info: On a smartphone, to ask a question, order items listed,  all me...george at 512 665 3388